Introduction: 

There is always a place in the house where excess water is present, but we usually procrastinate removing it because it takes a lot of hard work. Most of us do not have the energy and time to transfer water from one place to another or remove wastewater. This is where the water transfer pump comes in handy.

A water transfer pump can be very helpful in such situations as it does the work within minutes. There are many water transfer pumps in the market, and it surely would get very confusing to choose a good one, Manual water transfer pumps can also be used for purifying water.

You will understand the top ten best electrical, manual, and gaseous driven water transfer pumps in this article. The best self-priming and non-self priming water transfer pumps are mentioned in the article. Few pumps are perfect for agricultural use, which are also mentioned clearly.

This is an article of the top ten best water transfer pumps, which are economical, budget-friendly, and do everything and sometimes even more than what an expensive pump is capable of. 

Shurflo 5008-101-A64 New 3.0:

Best Water Transfer Pumps

Shurflo is the best water pump in the market today. The Shurflo 5008-101-A64 water transfer pump is small in size, but it can carry lots of water per minute. There are many expensive products in the market which spoil very quickly. This product does not spoil easily and is economical too.

Shurflo pumps have a capacity of 3 gallons per minute, which is pretty good compared to the other products in the same price range.

Features:

  1. Shurflo water pump gives a capacity of 3 Gallons per minute. Almost 3 gallons of water can pass through this pump in a minute.
  2. It is an electricity-driven 12 volt DC operator.
  3. Shurflo pump has a feature of self-priming.
  4. This pump is an internal bypass and low cycling pump.
  5. Shurflo is protected thermally. It has a fan motor protection.
  6. There is a built-in check valve in the shurflo water transfer pump, which prevents the backflow of water.

Specifications:

  1. Rating/stars: 4.5/5
  2. Voltage: 12 volts
  3. Product dimension: 6 x 6 x 4 inches
  4. Weight: 3.97 pounds.
  5. Colour: black
  6. Warranty: 2 years
Pros
  • Quiet.
  • Easy installation.
Cons
  • Works erratically.
  • Shouldn’t be dry.

2. Dolphin water pump:

The Dolphin water pump is one of the best water transfer pumps, which works manually. Dolphin water pump is a portable pump that can be taken from one place to another and can be used in picnics, parties, companies, and meetings. The Dolphin water transfer pump is the best and can be used as drinking water pumps. They can be fit in a good numbered gallon water bottle and can be used for drinking water pumps.

Features:

  1. Dolphin water pump fits in most of the 5-6 gallon water coolers. 
  2. The speed of the dispersion happens according to your wish. It can be quick or slow.
  3. It does not need batteries for working.
  4. A cleaning kit is provided with the product to make it easier for you to clean the product.
  5. The product is manufactured with 100% drinking water quality plastic.
  6. Dolphin water cooler does not only transfer water but can also be used for transporting oil, solvents or fuel, and obviously water.

Specifications:

  1. Rating/stars: 4.5/5
  2. Colour: blue
  3. Product dimensions: 10.5 x 6 x 5.5 inches
  4. Weight: 11.2 ounces.
  5. Warranty: 3 years
Pros
  • It can be used in any bottle.
  • Easy to install.
  • Good flow rate.
  • Economical choice.
  • An excellent choice for camping and parties.
Cons
  • High number of thrusts.
  • Very sensitive

Seaflo 33-series Industrial water Pressure pump:

Seaflo is one of the best harbor freight water transfer pumps in the market. They have three chambers present, which makes it easier for the flow of water. This product has a built-in pressure switch, which controls the pressure of the water transfer pump. Seaflo makes minimum noise while at work. It is a gas-driven pump that has good pressure and a plug for a wall outlet. This is one of the best water transfer pumps present in the market.

Features:

  1. Seaflo is a self-priming device. The water passage doesn’t need to be done manually. The device would do that work by itself.
  2. It is a Gas driven pump. Seaflo water transfer pumps work mostly on gas, not by electricity or manually.
  3. It has a 3.3 GPM flow capacity.
  4. A built-in adjustable pressure switch is present, which turns on and off by itself.
  5. Seaflo pump plugs into a standard wall outlet with a pre-installed power plug.
  6. Threaded connections with multiple fittings allow connections to every outlet.
  7. Thermal overload protected automatically due to overload with automatic restart feature.
  8. The motor does not make noise. It is one of the most silent pumps present in the market with minimum noise.
  9. Seaflo has switched inbuilt, which makes the pressure adjustable.
  10. Semi-rigid rubber feet for noise reduction and the vibration is provided with the pump.

Specifications:

  1. Rating/stars: 4.5/5
  2. Colour: black, white.
  3. Product dimensions: 8 x 5.1 x 4.8 inches.
  4. Weight: 4.2 pounds.
  5. Voltage: 118 volts.
  6. Warranty: 4 years
Pros
  • Self-priming.
  • 2-year warranty.
  • Good quality water pump.
Cons
  • Threads are not standard.

Watts Premier Instant Hot water Recirculating pump: 

10 Best Water Transfer Pumps

Watts Premier is a hot water transfer pump, which is the best pump as well as accessories. Watts premier works with any standard hot water tank. It provides hot water whenever needed and is very easy to install. Hot water can be produced in any container of the house. This product helps conserve many liters of water too. This water transfer pump is the best electric water transfer pump in the market. The Watts premier pump is a centrifugal pump that can handle water above 100 ºC.

Features:

  1. Watts Premier provides hot water at every faucet or shower whenever needed.
  2. This product eliminates wastewater. Watts premier is One of the best water transfer pumps which have a perfect process of purifying or eliminating unwanted and wastewater.
  3. This product conserves up to 15,000 gallons of water per year.
  4. It is very easy to install. It takes no time to connect the device. It is even a straightforward process.
  5. The kit includes a pump with timer, two adapters with rubber washers, valve mounting screws, sensor valve, and two-inch supply lines.
  6. This product is extremely quiet compared to other recirculating pumps.

Specifications:

  1. Rating/stars: 4.5/5
  2. Colour: blue.
  3. Product dimension: 6.2 x 6 x 5 inches
  4. Weight: 0.16 ounces
  5. Colour: blue
  6. Warranty: 1 year.
Pros
  • It provides hot water whenever necessary.
  • Conserves Water.
  • Easy to install.
Cons
  • Avoid heaters with heat traps.

Flojet triplex diaphragm automatic water:

Top Best Water Transfer Pumps

      Flojet triplex is a gas-driven pump. It is one of the best harbor freight water transfer pumps present in the market. Flojet triplex is small and portable, One of the best self-priming water transfer pumps. It is economical and cheaper than many such products in the market and works a lot better than other such products in the market. This is a diaphragm type. Automatic water transfer is an excellent quality of this pump. This works on both gas and electricity. 

Features:

  1. This water transfer pump has the feature of self-priming. The water transfer is automatic manual transfer of water through the inlet is not necessary. 
  2. Flojet has three chambers. 
  3. There is a little soft noise but not much.
  4. Flojet has a pressure of 3.4 bars.
  5. Snap-in port fittings are present in flojet water transfer pump.
  6. The bypass is built-in to produce less pulsation.
  7. It does not need an accumulator tank.
  8. Materials are corrosion resistant.
  9. This is a 12v DC product.

Specifications:

  1. rating/stars: 4.5/5
  2. Colour : white
  3. Voltage: 12 volts
  4. Product dimension: 9 x 4 x 4 inches
  5. Product weight: 2.6 pounds.
  6. Warranty: 2 years
Pros
  • Self-priming.
  • Good soil pump.
  • Works even at 10ft distance.
Cons
  • High noise.

SHURFLO industrial pump:

Shurflo is a small and best water transfer pump present in the market today. It is a gas-driven pump. Shurflo is given with a built-in pressure switch, with adjustable pressure settings. Santoprene valves and diaphragms are present.It has the best flow rate of 3.3 gallons per minute.

Features:

  1. Shurflo is an imported pump.
  2. 115 VAC 60Hz, non-corded 3 wires present, a built-in check valve is present.
  3. A built-in pressure switch is present for adjustable pressure requirements.
  4. Santoprene valves and diaphragms are present inside the Shurflo water transfer pump.

Specifications:

  1. Ratings/stars: 4.5/5
  2. Colour: silver.
  3. Product dimensions: 8 x 4 x 4 inches
  4. Product weight: 5 pounds
  5. Voltage: 115 volts
  6. Warranty: 1 year.
Pros
  • Great for the rain barrel system.
  • High pressure.
  • Lasts for a longer time.
  • Good for occasional garden use.
Cons
  • Connections not organized.

Whale Babyfoot manual freshwater galley pump:

Top 10 Best Water Transfer Pumps

Whale babyfoot is a small water transfer pump that is used manually. Whale water transfer pumps are very comfortable to use, and one of the best water transfer pumps in the market today. This product is portable, and a foot-operated galley pump. The flow rate is 2.2 gallons per minute. Whale pump is One of the most strong and durable products in the market today.

Features:

  1. A foot-operated water pump makes it easier to draw water in a galley for a wide variety of applications.
  2. A Simple foot can be used to draw water.
  3. This water transfer pump is angled to make the work more comfortable for you.
  4. It connects to a ½ inch flexible hose.
  5. This pump provides a maximum flow rate of 2.2 GPM.
  6. This water transfer pump is powerful and durable. 

Specifications:

  1. Rating/stars: 4.5/5
  2. Colour: black
  3. Product dimensions: 1.5 x 1.9 x 3.8 inches.
  4. Weight: 4.8 ounces
  5. Warranty: 1 year.
Pros
  • Comfortable to use.
  • Self-priming.
  • Small.
  • portable
  • Strong and durable.
  • Perfect for campers.
Cons
  • It takes a long time to expand

Wayne HP Cast Iron Multi-Purpose Pump:

Top 10 Best Water Transfer Pumps Review

      Wayne is an electrically powered product. It is a transfer water pump, ½ Hp, and 115 volts. This product can be used to pump water out of flooded basements, tanks, or boats. Wayne can be used to wash cars and sidewalks. This water transfer pump is one of the best gas-driven pumps. Wayne has a perfect pressure handle. 

Features:

  1.  Wayne pump is assembled in the USA with foreign and domestic parts.
  2. Wayne HP generates up to 50 PSI at outlet hose.
  3. It generates up to 15 ft of suction lift at the inlet hose.
  4. The product is highly durable, strong, and easy to use without any damage.
  5. It can be collected and fixed within minutes. Wayne products are very easy to install.

Specifications:

  1. Ratings/stars: 4/5
  2. Colour: black
  3. Product dimensions: 9 x 5 x 8 inches
  4. Weight: 14 pounds
  5. Warranty: 1 year.
Pros
  • Easy to install.
  • Great for ponds.
  • Works great for basements
  • Great for rain barrels.
  • Economical choice
Cons
  • No shut-off switch.
  • Rusts easily.

Bayite solar water heater:

Top 10 Best Water Transfer Pumps Review 2020

Bayite is the best hot water heater pump circulator. Bayite works on DC power supply, the noise is very low, and it is a non-self priming device. It helps heating water whenever required and needed. It is the best electrical driven water transfer pump. Barite can be considered one of the best non-self priming products in the market.

Features:

  1. The circulation pump is non-self priming. The maximum flow rate is 2.1 GPK. The maximum discharge head is 9.8ft. Water should be filled in the inlet valve until it flows out of the outlet valve.
  2. Bayite is an electrically driven water transfer pump which has a voltage of 12 volts.
  3. It does not make much noise.
  4. The maximum water circulation water temperature is 100 degrees celsius.

Specifications:

  1. Ratings/stars: 4/5
  2. Colour: black and golden.
  3. Dimensions: 5.2 x 3.8 x 3.2 inches.
  4. Weight: 10.6 ounces
  5. Warranty: 2 year
Pros
  • Warranty 2 years.
  • Less noise.
  • Cleaned easily.
  • Best hot water pump.
Cons
  • Submersible.

Everflo 12v diaphragm pump:

Top 10 Best Water Transfer Pumps Review 2020 - 10kreview

Everlo is an electrically driven water transfer pump. It is a 12v pump mostly used in agricultural fields and gardens. It can be used for many fluid transfer applications. This is one of the best water transfer pumps in the market. Used for many activities. It can be considered the number one choice when it comes to diaphragm pumps. This can even be used in agricultural fields like sprayers and spotters

Features:

  1. Everflo water transfer pump is a 12v pump that can handle up to 5.5 GPM and 60 psi.
  2. This water transfer pump is a self-priming system. Water need not be transferred manually. It is usually in-built.
  3. It is approved for use with roundup and other agricultural brand herbicides and insecticides.
  4. This water transfer pump is a fiberglass reinforced product.
  5. These water transfer pumps can be used for other fluid transfer applications such as soft wash, disinfectants, and sanitization.

Specifications:

  1. Rating/stars: 3.5/5
  2. Colour: black and blue.
  3. Product dimensions: 10.2 x 6.2 x 5.2 inches.
  4. Item weight: 6 pounds.
  5. Voltage: 12v
  6. Warranty: 3 years
Pros
  • Good pressure.
  • Good volume
  • Self-priming.
  • Best 12v pump.
Cons
  • Sensitive.
  • Stops working if not taken proper care.

What is a water transfer pump?

 Water transfer pumps perform a simple but critical activity. It is pretty difficult to transfer water from one place to another or remove water from a place without the use of this device. It gets very tiring and difficult to do this manually.

  1. There are three types of a water transfer pump, gas driven water transfer pump, electrical water pump and manual water pump.
  2. This article consists of the best gas, electrical and manual water pump.
  3. The main function of a water transfer pump is to transfer water from one place to another or to remove water from a particular place, like a pool, garden, backyard or underground water.
  4. Manual Water transfer pumps like dolphin water pumps are also used to purify water for drinking.
  5. To use this, simply place the inlet hose in the water you want to remove, and position the outlet hose to where you want the water to go.

How do you use a water transfer pump?

 The main way to use them is to put the inlet in the place from where you want to remove the water and position the outlet hose towards the place where you want to send the water to.

But the way to use it changes from one type of water transfer pump to another.

  • The harbour freight water transfer pump should often be primed before the usage. 
  • They should not be dry while using. If they are dry they should be stopped, properly moistened and then used.    
  •  Manual pumps or hand pumps are manually operated devices to pump      water. Usually a lever is given to use as a handle, a pipe given to immerse in the water. The lever should be given a few thrusts and the water emerges from the pipe through the inlet and comes out of the outlet which is an opening.
  •  2 inch gas water transfer pumps are provided with clamps and gas cylinders which should be switched on and off when needed. They do not leak.
  •  Electrical pumps are given with all the proper devices and batteries. The    batteries should be attached and they should be connected and used.

 How to prime a water transfer pump?

 Priming simply means preparing or getting something ready for operation. Few pumps are self priming and you have to prime a few water pumps by yourself. 

Steps to prime a water pump.

  1. First you have to make sure that the power is turned off.
  2. Gain access to the pump system.
  3. Then you should check properly whether there is anything damaged or not.
  4. The hose should be tested.
  5. The relief valves should be opened.
  6. The hose should be attached to the valves.
  7. Turn on the water and wait for it to enter the tank.
  8. Then turn the power on.

The water should be on for at least a minute. After opening any valve, wait for a minute. If the pump turns off naturally the device is primed. Otherwise this should be repeated again.

 What are the different types of water pumps?

  There are three main types of water transfer pumps.

  1. Positive displacement pump
  2. Centrifugal pump
  3. Axial water transfer pump.

Positive displacement pump:

  1. A Positive Displacement Pump has an expanding cavity on the suction side and a decreasing cavity on the discharge side. 
  2. Liquid flows into the pumps as the cavity on the suction side expands and the liquid flows out of the discharge as the cavity collapses. 
  3. The volume is a constant given each cycle of operation.
  4. Examples of positive displacement pump: piston, plunger, diaphragm, gear, lob, screw and vane

Piston and plunger are used to pump low viscosity fluids paint spraying, oil production, and high force washing

Centrifugal water transfer pump:

  1. Centrifugal Pumps are the most popular and commonly used type of pump for the transfer of fluids. 
  2. In simple words, it is a pump that uses  a rotating impeller to move water or other fluids by using centrifugal force.
  3.  Centrifugal pumps   are used to induce flow or raise a liquid from a low level to a high level.

Axial water transfer pump:

  1. Axial flow pumps are used in applications requiring very high flow rates and low pressures. 
  2. They are used to circulate fluids in power plants, sewage digesters, and evaporators. 
  3. They are also used in flood dewatering and irrigation systems.

How do I transfer water from a low level to a high level without a pump?

 The gravitational force is such that the water moves downwards. Water transfer pumps is a way which helps the pressure against this. There are few more possibilities for this other than water transfer pumps and they are: 

  1. The thermosiphon is a good way to do this if rising the temperature is not an issue.
  2. capillary effect could be a viable solution in cases where the volume of water to be transferred is extremely small.
  3. For larger volumes of water, generally air-pressurized tanks are used in case there is a limitation on using pumps. These tanks are so designed that there is a vacant space at the top of the tank. This vacant space is filled with air using an air compressor.
  4. Ram pumps can also be used for this process but they may cost too much.

These are the few ways in which water can be transfered from low level to high level without the use of water transfer pumps.

Conclusion:

This article consists of the best water transfer pumps in the market, for transferring water. Best 12v, harbour freight self priming and non self priming pumps are listed in the article, you will understand the features, specifications, pros and cons of each product.

These are ten budget friendly, economic and cheap products which are better than many of the expensive products in the market. We hope that it will help you a lot.